Fujitsu Printer FTP 627USL431 User Manual

24v driveN, reCeiPt PriNter MiNi uNit  
2” high sPeed therMal PriNter uNit  
FTP-627USL431/631  
Overview  
The FTP-627 USL Series are 24V driven high-speed  
printers with a ultra low profile auto cutter and long life. The  
FTP-627 USL Series can be used for a variety of applica  
tions, such as POS terminals, mini Kiosks, banking terminals,  
and measurement and medical equipment.  
Features  
Ultra low profile  
Height 145 mm, width 105 mm, depth 120 mm  
Windows®2000/XP, Linux, and OPOS drivers  
FTP-627USL431/631  
High speed printing  
It can print at 100 mm/s (or 150 mm/s) maximum by using  
Fujitsu's unique head drive control.  
Auto Cutter  
Long life and high reliable guilotine with dedicated motor.  
Easy paper setting  
Our lever platen release mechanism allows a wide paper  
route, so 83mm diameter paper can be easily inserted.  
Multifunctional die-cast frame  
Wide operating temperature range, long continuous printing,  
high ESD absorbtion and discharge of static electricity  
vibration and shock resistant.  
Barcodes  
Prints standard, extended and 2-D types  
RoHS compliant  
 
FTP-627USL431/631  
sPeCiFiCatiONs  
Item  
Specification  
Part Number  
Interface  
FTP-627USL431/435  
Conforms to USB / Serial  
FTP-627USL631/635  
24 VDC average current, 0.5A (0.9A peak)  
(print ratio: 12.5%, print speed: 100mm/sec.)  
24 VDC ±5%, 0.8 A maximum  
For print head  
Power  
For motor  
supply  
For cutter  
24 VDC ±5%, 1.1 A maximum  
For logic  
5 VDC ±5%, 0.2 A maximum  
Dimensions Mechnism and board  
101 x 114 x 139mm (WxDxH)  
Weight  
Mechnism and board  
Approximately 600g  
Pulse resistance: 100 million pulses/dot (under out standard  
conditions); Abrasion resistance: paper traveling distance  
50km (print ratio: 12.5% or less) 100km (print ratio: 12.5% or less)  
Head  
Life  
Cutter  
500,000 cuts (20 cuts/minute)  
5,000 (open/close)  
3,000 hours  
1,000,000 cuts  
Platen  
Mechanism  
Circuit board  
MTBF  
500, 000 hours  
Operating temperature* 0˚C to 50˚C  
Operating humidity 20 to 85% RH (no condensation)  
-20˚C TO +60˚C (paper not included)  
Operating  
environment Storage temperature*  
Storage humidity  
5 to 90% RH (no condensation)  
Detected by thermistor  
Head temperature  
detection  
Detection  
Paper out /mark  
function  
Detected by photo-interuptor  
detection  
Platen release  
Detected by sliding switch  
High Sensitive Paper  
Standard Paper  
TF50KS-E4 (Nippon paper)  
TF60KS (Nippon paper),  
FTP-020PU001 (58mm),  
PD105R (Oji paper),  
FTP-020P0701 (58mm)  
TF60KS-F1, FTP-020P0102  
(58mm), PD170R (Oji paper),  
P220VBB-1 (Mitsubishi paper)  
PD160R-N (Oji paper), AFB-235  
(Mitsubishi paper), TP50KJ-  
R (Nippon paper), HA220AA  
(Nippon paper)  
Recommended thermal sensitive  
Medium Life Paper  
Long Life Paper  
paper  
*+5˚C to +40˚C printing density assurance rance.  
3
 
FTP-627USL431/631  
FuNCtiON OF iNterFaCe bOard  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test print function  
8.  
9.  
Cutter trouble detect  
Paper out detection  
Motor power saving function  
Paper near end detection  
Platen open detection  
10. Mark detection function  
11. MCU operation abnormality detection  
12. Power ON/OFF sequence protection  
13. Motor over-current protection  
14. Hardware timer  
Thermal head temperature abnormality detection  
Blow-out fuse detection  
Head voltage abnormality detection  
iNterFaCe, COMMaNd, OPtiONs  
Connectors on Control Board  
Name  
Functions  
Remarks  
Note  
CNꢀ +24V power supply connector Connection for +24V power supply  
CN2 RS-232C connector  
CN3 USB I/F connector  
Connection for serial interface  
Connection for USB interface  
-
*2  
*2  
CN4  
-
CN5 Cutter connector  
Connection for paper cutter  
Connection for operation panel  
Connection for near end switch  
-
CN6 Operation panel connector  
CN7 Near end sensor connector  
*ꢀ  
*ꢀ  
CN8  
-
CN9 Logic power connector  
CN10 Head/motor connector  
Connection for +5V power Supply  
Connection for thermal head & paper feed motor 2-inch, 24 pin  
Note: *1: Option  
*2: Depends on P/N  
4
 
FTP-627USL431/631  
diMeNsiONs  
1. FTP-627USL431/435  
FTP-627 Unit Paper ø83  
Unit: mm  
Note: 1. The cable size and FPC are not included in this drawing.  
2. Do not mount anything in the shaded area except the printer.  
3. Connect to the body with 2 screws at 2 hooks.  
5
 
FTP-627USL431/631  
diMeNsiONs  
1. FTP-627USL440  
FTP-627 Unit Paper ø83  
Unit: mm  
Note: 1. The cable size and FPC are not included in this drawing.  
2. Do not mount anything in the shaded area except the printer.  
3. Connect to the body with 2 screws at 2 hooks.  
6
 
FTP-627USL431/631  
COMMaNds  
Command  
Contents  
HT  
LF  
Moves print position to the next tab.  
Line feed.  
FF  
Feeds forms (new page).  
ESC FF  
Data printing in page printing mode.  
Sets reverse printing.  
ECS RS  
ESC US  
Resets reverse printing.  
ESC SP+n  
ESC ! + n  
Character spacing setting.  
Sets print mode.  
ESC $+n1+n2  
ESC % + n  
ESC & +y+c1+c2+x+d1to dn  
ESC *+m+n1+n2+d1+dN  
ESC - +n  
Absolute position spacing.  
External registration character specification/cancellation.  
External registration character definition.  
Sets bit image mode.  
Undeline setting.  
ESC 2  
Sets 1/6 inch line feed length.  
Sets the line feed length.  
ESC 3+n  
ESC ? + n  
ESC @  
External registration character deletion.  
Printer initialization.  
ESC A+n  
Sets the space between the line.  
Sets the page length by character line.  
Sets the tab position.  
ESC C+n  
ESC D+d1+dN +NUL  
ESC E+n  
Highlighted printing specification/cancellation.  
Feeds paper in forward direction and prints.  
Print and reverse direction paper feed.  
Page printing mode selection.  
Frame overlay function.  
ESC J+n  
ESC K+n  
ESC L  
ESC Q+n+!+j  
ESC R+n  
Selects international character.  
Line printing mode.  
ESC S  
ESC T+n  
Print direction setting (only page mode).  
Right Rotation 90° specification / cancellation.  
ESC V+n  
7
 
FTP-627USL431/631  
Commands continued  
Command  
Contents  
ESC W+Xꢀ+X2+ꢀ+Y2+dXꢀ+dX2+dXꢀ+dY2  
Page printing mode printing area setting.  
ESC X+m+n  
ESC Y+01h+ESC+x+a+m+d~  
ESC Y+n1+n2  
ESC a+n  
Setting the turning time of the motor excitation.  
Program download.  
Relative position setting.  
Positional alignment.  
ESC c+1+n  
ESC c+5+n  
ESC d+n  
Sets internal processing.  
Panel switch enable/disable setting.  
Printing and n-line feeding.  
n lines reverse feed.  
ESC e+n  
ESC i  
Full cut  
ESC m  
Partial cut  
ECS s+n  
Sets printing speed.  
ECS t+n  
Character code table selection.  
Sets/resets upside down printing.  
Flash memory delete  
ESC {+n  
ESC DEL+n  
FS !+n  
Kanji printing mode collective specification.  
Kanji printing mode specification.  
Kanji underline specification/cancellation.  
High speed collective image printing specified.  
Kanji printing mode cancellation.  
External character definition.  
Sets the detection functions.  
Kanji code system selection.  
Correction of impressed energy.  
Kanji spacing setting.  
FS &  
FS-+n  
FS *+ m+n1+n2+d1 to dn  
FS .  
FS 2+c1+c2+d1 to dn  
FS 9+n  
FS C+n  
FS E+n  
FS S+n+n1+n2  
FS W+n  
Kanji double height adn width printing specification/cancellation.  
Parameter transmission.  
FS r+n*  
FS-r+n  
GS!+n  
Setting return parameter  
Setting character size  
8
 
FTP-627USL431/631  
Commands continued  
Command  
GS $ + n1 + n2  
GS & +m + x + y1 + y2 + d1 to dn  
GS' + m + n  
Contents  
Vertical absolute position specification in page printing mode.  
Registered bit image definition.  
Registered bit image printing.  
Registered bit image definition.  
Registered bit image printing.  
Line feeds to the next mark.  
Sets the line feed length after mark detection.  
Angle setting of bar code.  
GS *+x+y1+y2 +d1+dn  
GS/ +m  
GS <  
GS A+m+n  
GS B+m  
GS E+n  
Sets print quality.  
GS H+n  
HRI character printing position selection.  
Left margin position setting.  
Printer ID demand.  
GS L+n1+n2  
GS M+n  
GS W + n1 + n2  
GS Y +n1 + n2  
Printing area width setting.  
Vertical relative position specification in page printing mode (vertical direction  
of characters).  
G a+n  
Automatic notification setting status.  
Sets bar code width.  
GS e+n+m  
GS f + n  
GS h+n  
HRI character font selection.  
Sets bar code height.  
y) GS k+m +d1to dk + NUL  
x) GS k+m+n+ d1 to dn  
Bar code printing.  
GS k+m+k1+k2+k3+k4+{[p1][d(1,1)] ~  
[d(1,i)} ~ {[pi][d(i,1)]~[d(i,j)} [00]16  
Print of 2Dcode (QR).  
GS k+m+k1+k2+k3+k4+k5+d1~dn  
GS k+m+k1+k2+k3+k4+k5+k6+d1~dn  
GS v  
Print of 2 Dcode (maxi).  
Print of 2 Dcode (PDF417).  
Notification of firmware version.  
Sets bar code length.  
GS w+n  
GS (+c+m1, n2, m+fn+6 +d1~dn  
Customize printer  
*: These commands are valid with FTP-627DSL600 series.  
9
 
FTP-627USL431/631  
PriNt saMPle  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141 8630, Japan  
Tel: (81-3) 5449-7010  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Fax: (31-23) 5560950  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-3021  
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev.May 5, 2008.  
10  
 

Ei Electronics Switch EI159 User Manual
Extron electronic Network Card RGB 320 User Manual
Ferrari Automobile 512 TR User Manual
Fostex Speaker System 6301BX User Manual
FUNAI Flat Panel Television BLC320EM9 User Manual
Fundex Games Games Heist User Manual
Furuno SONAR CH 34 36 User Manual
Furuno SONAR FSV 30 User Manual
Gardena Two Way Radio 1243 User Manual
Gateway Computer Monitor FPD2275W User Manual