MD-1210CM
12.1 TFT-LCD DVD/SD/USB/
iPOD COMBO MONITOR
M
MENU
AV
POWER
PLAY
OWNER S MANUAL
Contents
Mute
20
20
20
Caution
4
Play or Pause
Audio
Features and Controls
Monitor/DVD Player
Remote Control
6
6
8
Stop
21
21
21
Arrows
Setup
Menu
Power and Mode Selection
Releasing The Monitor
Turning on The Monitor
Mute Function
10
10
10
10
21
Display
Number Buttons
Subtitle
Title
22
22
23
23
Selecting an AV mode
11
Picture Control
Contrast/Brightness/Color/FM
12
12
Slow
Fast Reverse Searching
23
24
DVD Setup
Setup Menu
13
13
Fast Forward Searching
Previous
24
25
25
General Setup
TV Aspect Ratio
Angle Viewing
14
14
14
Next
Repeat A-B
25
Repeat
NTSC/PAL
Angle
26
26
26
OSD Language
Captions
14
15
15
Screen Saver
Last Position memory
15
PBC
Zoom
27
27
27
Audio Setup
15
GO to
Speaker Setup
Equalizer Settings
Preferences Setup
15
16
SD/USB/iPOD Functions
Connection Diagram
28
29
17
TV Type
Parental
Audio
Subtitle
Default
Password Setup
Password Mode
Password Change
17
17
17
18
Installation
30
31
Disc Information
Troubleshooting
Specifications
18
19
32
33
19
19
DVD Functions
20
Eject
Vol+/Vol-
20
20
3
SPECIFICATIONS
Caution
Please read and observe all warnings and instructions in this manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
Power
DC 12V
Screen Format
Resolution Pixel
Color System
A/V Input
4:3
The lightning bolt with arrowhead inside in an equilateral
triangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
people.
2400x600
,
NTSC/PAL Auto Select
DVD-iPOD-AV1-AV2
WARNING
A/V Output
Dimension
1 EA
The exclamation point inside an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
With shroud:15. 1(L)X13. 9(W)X3. 5(H)inches
Dimension
Without shroud:14. 8(L)X13. 6(W)X2. 5(H)inches
the product.
CAUTION
Note: This equipment has been tested and has been found to comply
with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference. In some cases, the user will
be required to correct the interference at his own expense.
WARNING
Do not mount the product where
it will obstruct the deployment of
Installation of all TV monitors
the airbag or in an area where it
,
M
E
N
U
must be out of the driver s
field of vision.
would affect the driver s ability
to control the vehicle. Also be
careful to avoid mounting the
product where it can become
hazardous during sudden stops
or in the event of an accident.
Do not try and service these
products yourself, locale a
qualified service center or
factory service center for all
repairs.
Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician. Severe harm or danger can result.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
Bareful not to overload your
cigarette lighter plug by adding
more than one device at a time.
4
33
Caution
Troubleshooting
CAUTION
Watching the monitor for an
extended period of time
without the engine running
may deplete the vehicle s
battery charge.
Symptom
Items to Check
Actions to be Taken
Quality installations are best
performed by qualified and
certified installers.
Buttons do not work.
No sound
Is the power turned on?
Check the car battery capacity.
Is the audio which is connected with
the audio le set to receive
the DVD sal output?
Select the correct input mode for the audio receiver.
Connthe audio cable into the jacks securely.
Turn he monitor connected with the audio cable.
Is audio cable is connected securely?
Set the Digital Audio Output to the correct position,
and then turn on the DVD player again by pressing
the POWER button.
Is the itor which is connected
with tudio cable turned on?
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Is the digital audio output set
in the correct position?
Don t touch the unit if there is
a flash of lightning. You may
receive an electric shock.
Remote control does
not work properly.
Is the remote control facing
the remote sensor?
Point the remote control toward the remote sensor of
the product.
Is the distance too far?
Use the remote control within 15 feet.
Remove the obstacle.
Is there any obstacle in the middle?
Is the battery weak?
Replace with new battery.
Do not cover or stop up heater
ducts or vents. It may cause a
fire or receive an electric shock.
Do not bring magnetic devices
such as credit card or magnetic
card near the magnets.
Moisture or condensation on lens
When a disc is brought from a cold environment to a warm one, there may be moisture
on the the disc, or condensation on the pickup lens. It will affect disc playback.
Operating Notes
1. The operating temperature of this product is limited to 14 ~+140 F.
2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.
1. Remove the disc from the DVD player.
2. Turn on the power and leave it on for an hour to vaporize the condensation.
3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30degrees).
4. Do not open the housing and attempt to make any repairs yourself. Refer
servicing to qualified personnel.
5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.
6. Do not cut the car power supply off while a disc is playing. It can cause
damage to the DVD Player.
5
32
Monitor / Player System Components
Disc Information
DVD features
DVD discs provide high-resolution images with high-quality sound and surround
sound effects. This DVD player can play not only DVD discs of various versions, but
also S-VCD, VCD, audio CD and MP3 discs.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In
addition, a CD or a CD-RW which was recorded on special software cannot be played.
Remote Control
Region code
Your DVD player is designed and manufactured to region management information
that is recorded on a DVD disc. Please check the region code.
1: North America 2: Japan 3: Korea and Southeast Asia
4: Australia, Mid & South America 5: Russia 6: China
How to handle the disc
M
MENU
AV
Don t touch the shiny side of the disc (the side with the embedded informan).
Don t stick a label or a glue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive reside.
It might result in damage to your DVD player.
POWER
PLAY
Don t put discs in the sunshine.
Park your car in the shade.
WARNING:
0 C to 35 C (32 F to 95 F)
please do not leave iPOD in
the flip down unit when the
car is left unattended.
iPOD only can work between
Monitor/DVD Player
How to handle the discs
Only use round dcs. Discs with other shapes like a star, a heat, etc. may cause
damage to the player.If a disc is dirty, wipe softly with a wet cloth and then with a dry
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not
use any type of solvent such as thinner, benzene, commercially available cleaners or
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
The high temperature of the
locked car on a hot day will
damage your iPOD.
Wireless Headphones
6
31
Installation
Features And Controls
POWER Button
PLAY/PAUSE Button MENU Button
1. Open the package and check that these items are presents.
M
MENU
AV
POWER
PLAY
INSTALLATION PLATE
UNIT
SCREW A
SCREW B
FAST Forward/Reverse Button
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 29)
Dome Light Button
Dome Light Button
AV Select Button
+/- Buttons
3.Match the position of installation bracket and
installation plate with screw A.
EJECT Button
Disc loading slot
M
MENU
POWER
AV
PLAY
R
AUDIO
L
VIDEO
RESET
AV2 INPUTS
4. Tighten the unit with the supplied
screw B.
SD Input USB Input iPOD Input
.
..
X
.
Caution
Do not bring magnetic devices
such as credit cards or magnetic
cards near the monitor.
30
7
Connection Diagram
Features and Controls
Remote Control
1
POWER
Turns the DVD Player/Monitor on or off.
2
MUTE
Red AUDIO(R)
Press this button to switch off the
audio during playback. Press again
to restore the audio.
Red AUDIO(R)
GAME
GAME
White AUDIO(L)
iPOD
Vol-
MONITOR
White AUDIO(L)
(iPOD)
3
Yellow VIDEO
Yellow VIDEO
CAMCORDER
To start playback of iPOD, press
this button. Press again to pause
the playback. If playback is paused,
press this button to resume
playback.
CAMCORDER
Vol+
YELLOW
AV Input
(AV 2)
+ 12 V DC Battery
AV Input
(AV 1)
BLACK
RED
Chassis Ground
ACC
VOL-/VOL+
Use to incease or decrease
volume level.
Red AUDIO(R)
Door Trigger
WHITE
AMP
White AUDIO(L)
RIGHT( )/LEFT( ) ARROWS
Use these buttons(press once)
to skip to the next or last track,
chapter or file on the iPOD in
the player. But if you use these
buttons (press continuous) to
select either fast forward or fast
reverse playback.
Yellow VIDEO
MONITOR
P
O
W
E
R
AV
M
E
N
U
V
O
L
-
VOL+
AV
Output
AV SELECT
DVD iPOD AV1 AV2
MENU (OSD on monitor)
Press this button to open the on-
screen menu system to setup and
control various parameters of the
monitor and DVD player.
UP/DOWN
Use to move to the desired menu.
P/N
TITLE (Title menu)
When a DVD is playing, press this
button to view the Title Menu.
This button permits you to choose
among Multi, PAL and NTSC.
DISPLAY
Press to show elapsed or remaining
time of a chapter or a title.
MODE
Use this button to switch between
three modes
DVD SD USB
PBC (Video CD only)
FM ANTENNA
MENU (DVD menu)
Press this button to access the special
Playback Control functions for VCD
2.0 format Video CD S.
This button permits you to view the
menu on the DVD.
-
i g r g T e r D o + o r
NUMERIC button
SUBTITLE
Use this button to select the menu
for choosing a subtitle language.
Use when making a selection on the
menu screen.
8
29
SD/USB/iPOD Functions
Name And Function Of Each Part
1. When USB or SD is inted, the monitor will be displayed as shown below. But when
you input USB that the function can not change into SD S state (only the SD is
moving). And you can select the desired menu by pressing the MODE button on the
remote control of monitor.
GO TO
RETURN
Use to search for a title or a chapter on
your DVD disc.
Press this button to return root menu.
SETUP
Press this button to display the Setup
menu. The Setup menu enables you
to enter the settings required for the
unit to work properly.
STOP
2. Use the (arrow and ENTER) buttons to select and set desired settings.
Press this button to stop the playback
of the current disc.
SKIP FORWARD/BACK
00:00 00:00
000/003
kbps
REPEAT
Use these buttons to skip to the next
or last track, chapter or file on the
disc in the player.
Press this button to change the yback
mode to repeat, and to select the repeat
mode.
\
FAST FORWARD/REVERSE PLAY
A-B (repeat from A to B)
Use these buttons to select either fast
forward or fast reverse playback.
..
..
Use this button to select the beginning
and end of a track which you wish to have
repeat in playback.
VOL-/+ button
Use to incease or decrease volume level.
AUDIO
Use this button to select one of the
audio soundtracks programmed on a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.
3. When iPOD is inputed, the state can not be exchanged. But you can press
the AV button on the remote control to selelct and set desired settings.
ENTER
Press this button to confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played on the DVD.
ZOOM
If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you to change
the amount of zoom.
UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons to navigate the
various menus and screens for the
monitor and DVD systems.
PLAY/PAUSE
To start playback of a disc, press this
button. Press again to pause the
playback. If playback is paused, press
this button to resume playback.
9
28
Power And Mode Selection
DVD Functions
PBC
Releasing The Monitor
[DVD]/[AUDIO]/[MP3]
This button does not function in PBC mode.
[VCD]
Push the release button (located on the front edge of the screen housing) and
lower the monitor. You can also adjust the swivel angle.
You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is
similar to selection of DVD title. Please note that this function does not work with
MP3 dics.
M
MENU
AV
POWER
PLAY
Make this arrow in DOWN
direction only.
Zoom
CONDITION
ZOOM X 2
ZOOM X 3
ZOOM X 4
ZOOM X 1 / 2
ZOOM X 1 / 3
ZOOM X 1 / 4
Off
OSD
2 X
[DVD]
Some DVDs are programmed to allow you to zoom into
the image, magnifying it. Pressing the ZOOM button
does this in steps, according to the chart to the right.
PULL BUTTON
3 X
4 X
1 / 2
1 / 3
1 / 4
Turning on The Monitor
[VCD]/[AUDIO]/[MP3]
1. Connect the monitor to external devices.
This button does not function in this mode.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
GO TO
Press the same POWER button to turn the power off.
The GO TO function allows you to begin playback at a specific location on the disc. To
do this, press GO TO and navigate the screen which follows to select this playback
location.
POWER
Title
Move to the desired title.
POWER
Chapter
Move to the desired chapter.
REMOTE CONTROLLER
UNIT
Audio
Selects the desired audio output.
3.Power on the external devices and play.
Subtitle
Select the desired subtitle.
Menu
Mute Function
Title
01 / 02
Chapter
Audio
06 / 61
Angle
1. Press the MUTE button on the remote control to mute the audio.
5.1CH Chinese
OFF
Subtitle
Watch the different view angle.
2. Press the MUTE button again on the remote control to return to the
previous volume level.
Title Elaapsed 0:20:02
TT Time
Total time.
Bitrate 31
CH Time
Chapter time.
Repeat
Sets the repeat play.
Time Display
Watch play time.
10
27
Power and Mode Selection
DVD Functions
Selecting an AV mode
Repeat
1. Turn the power ON on the unit and on the external devices.
[AUDIO]
[DVD]
2. Select the DVD, iPOD, AV1 or AV2 mode by pressing the AV Select button on
the unit or on the remote control.
Pressing REPEAT button changes
the play mode as follows:
Pressing REPEAT button changes
the play mode as follows:
OSD
Chapter
CONDITION
OSD
CONDITION
Repeat single
3. Play the external device.
Repeat chapter
Repeat title
Track
All
All
Title
All
All
Repeat off
Repeat off
[VCD]
[MP3]
The REPEAT button does not function
when a VCD disc is being played.
Pressing REPEAT button changes
the play mode as follows:
OSD
CONDITION
Single
Repeat One
Repeat Folder
Repeat folder
Folder
Repeat folder one time
Shuffle
Random
Single
All
Random play
Single play
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSC
and PAL formats.
Angle
Some DVD s are recorded with additional footage which allows you to view a scene
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on
the screen. When that occurs, press the ANGLE button to see these alternate viewing
angles.
11
26
DVD Functions
Picture Control
Contrast/Brightness/Color/FM
Prev(
)
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until
you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.
[DVD]/[VCD]
Press this button to advance the player from the current chapter to the previous
chapter.
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
[AUDIO]/[MP3]
Press this button to move to the previous track.
2. Press e MENU button on the unit or the remote control of monitor until you see
the screen you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
Next(
)
CONTRAST
[DVD]/[VCD]
42
Press this button to advance the player from the current chapter to the next chapter.
BRIGHTNESS
[AUDIO]/[MP3]
55
Press this button to move from the current track to the next track.
COLOR
50
FM
87.7
Repeat(A-B)
(FM function added 87.7 87.9 88.1 88.3 88.5
88.7 88.9 89.1MHz)
[DVD]/[VCD]/[AUDIO]
You can set the player to repeat a segment over and over until you cancel it. To do
this, you mark the beginning of the desired segment (A) and the end of segment (B).
The selected segment will be
repeated automatically until canceled.
OSD
A
CONDITION
Start point of repeat
A
B
Ending point repeat function
12
25
DVD Setup
DVD Functions
Fast Reverse Searching(
[DVD]
)
Setup Menu-Main Page
[AUDIO]
Pressing FR button repeatedly changes
the play mode as follow:
Pressing FR button repeatedly
changes the play mode as follow:
When the SETUP button is pressed, the setup menu will be disped as shown
below. Select the menu category and make changes according to charge your
preferences.
OSD
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
OSD
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
FR 2X
FR 4X
1. Press the STOP button if the disc is playing.
2. Press the SETUP button to display setup menu.
FR 8X
FR 16X
[MP3]
Pressing FR button repeatedly
changes the play mode as follows:
FR 32X
PLAY
OSD
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
General Setup Page
TV Display
OSD Lang
PS
ENG
Fast Forward Searching(
[DVD]
Pressing FF button repeatedly changes
)
[AUDIO]/[VCD]
Pressing FF button repeatedly
changes the play mode as follow:
the play mode as follow:
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forwardsearch
Play
OSD
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forward search
Play
Go To Speaker Setup
FF 2X
FF 4X
3. Use the (arrow and ENTER) buttons to select and set desired settings.
4. Press the SETUP button again to turn off the setup menu.
FF 8X
FF 16X
[MP3]
Pressing FF button repeatedly
changes the play mode as follows:
FF 32X
PLAY
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forwardsearch
Play
13
24
DVD Setup
DVD Functions
General Setup
Subtitle(SUB-T)
1. TV Aspect Ratio
In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
[DVD]
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Title
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)
[DVD]
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
General Setup Page
TV Display
OSD Lang
PS
Normal/PS
Normal/LB
Wides
Slow(
)
[DVD]/[VCD]
OSD
CONDITION
Set TV Display Mode
2X slow forward
1 / 2
Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.
4X slow forward
8X slow forward
16X slow forward
32X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
1 / 4
2. OSD Language
1 / 8
General Setup Page
1 / 16
1 / 32
1 / 2
TV Display
OSD Lang
PS
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
ENG
English
1 / 4
1 / 8
Set OSD Language
1 / 16
32X slow rewind
Play
1 / 32
Play
14
23
DVD Setup
DVD Functions
Display
Audio Setup
[DVD]
Pressing the DISPLAY button on the
[AUDIO]
Pressing the display button displays
remote control changes the play mode as information about the current CD on the
follows:
screen as follows:
General Setup Page
OSD
CONDITION
OSD
CONDITION
Speaker Setup
Equalier
3D Processing
Single Elapsed
Display the single elapsed
Display the Title Elapsed
Display the Title Remain
Title Elapsed
Title Remain
Single Remain
Total Elapsed
Display the single remain
Display the total elapsed
Display the total remaining
Display the Chapter Elapsed
Display the Chapter Remaining
No sign
Chapter Elapsed
Chapter Remain
Total Remain
Display Off
[VCD]
[MP3]
Your DVD player will display the counter
automatically when you play the MP3 disc.
Whenever press the button,title chapter
will be displayed as follows:
Go To Speaker Setup
OSD
CONDITION
Display time
Single Elapsed
Show below are two examples of Audio Setups.
Single Remain
Display Off
Left display time
No sign
1. Speaker Setup
Number Buttons
[DVD]
General Setup Page
General Setup Page
The 0 through 9 number buttons are used to enter the number of the track, the number
of the DVD chapter, the time, the date, etc.
Speaker Setup
Equalizer
3D Processing
Downmix
Front Speaker
VRS
LRG
LT/RT
Stereo
V SURR
Off
[AUDIO]
OSD
CONDITION
Select a track by pressing the
corresponding number button.
Select Track:__
Select track no
[DVD]
OSD
CONDITION
Go To Speaker Setup Page
Set Downmix Mode
You can select a track in the folder by
pressing the corresponding number button.
__:__
Select track no
22
15
DVD Setup
DVD Functions
Stop(
)
Downmix
Use this function to set the input audio
signal to match your speaker setup.
Front Speaker
Use this function to change the setting
from the factory.
[DVD]/[AUDIO]
OSD
CONDITION
Stop
In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. If
you press STOP and then PLAY/PAUSE twice,
the player will begin playback at the first
scene of the movie.
1 Time Press Play Key To Continue
2 Time
Disc Stop
General Setup Page
General Setup Page
Downmix
Front Speaker
VRS
LRG
Downmix
Front Speaker
VRS
LRG Larege
LT/RT
Stereo
V SURR
Off
[MP3]
OSD
CONDITION
In MP3 mode, Pressing STOP will stop the
audio playback. Press PLAY/PAUSE to begin
playback of the first title on the disc.
1 Time
Stop
Stop
Set Downmix Mode
Set Front Speaker
Arrows( / / /
[DVD]
In addition to navigating the various menus, you can use the arrow buttons to define the area
)
2. Equalizer Settings
of the screen you want to enlarge in ZOOM mode.
Equalizer Page
General Setup Page
EQ Type
None
None
Rock
Pop
[MP3]
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
Speaker Setup
Equalizer
3D Prosessing
Live
Dance
Techno
Classic
Soft
Select Equalizer Type
Setup
Go To Equalizer Page
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD
settings to suit your equipment and preferences.
EQ Egualizer Type
In this menu you can choose the desired preset
equalizer mode.
Equalizer Page
EQ Type None
None
Rock
Pop
(Choose from Rock, Pop, Live,Dance, Techno,
Classic or Soft)
Live
Menu
[DVD]
Dance
Techno
Classic
Soft
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,
depending on the programming of the disc.
Select Equalizer Type
21
16
DVD Setup
DVD Functions
Eject
Preference
1. TV Type
Choose the proper TV format appropriate to the
monitor you have connected to the player from
the following: NTSC, PAL or Multi type.
When this button is pressed, the disc is ejected. When thiutton is pressed for more
than 3 seconds, the disc is unconditionally ejected. So, ycan use this function when
you encounters not ejected situation due to unknown reasons.
Preference Page
TV Type
Parental
Audio
Subtitle
Default
NTSC
ENG
PAL
Multi
NTSC
Vol+/Vol-
1. Press the SETUP button during stop mode.
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to TV Type.
Use these buttons to adjust the audio output level of the speaker from 0 to 20.
4. Press the ENTER button.
/
5. Press the
buttons to select TV Type.
Set TV Standard
Mute
2. Parental
OSD
CONDITION
Mute
Press MUTE to turn off the audio part of the
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.
The Parental Control settings limit the player to only play content at or below a certain
movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.
Mute
Mute off
Mute off
1. Press the SETUP button when stop mode.
Preference Page
Play or Pause(
)
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Parental.
TV Type
Parental
Audio
NTSC
ENG
1 KID SAF
2 G
3 PG
OSD
CONDITION
Play Disc
4. Press the ENTER button.
5. Press the buttons to select desired
parental level.
Subtitle
Default
4 PG 13
5 PGR
6 R
Whenever this button is pressed, the mode
switches from pause to play or play to pause.
/
7 Nc17
8 ADULT
Pause
Set Parental Control
3. Audio
Audio
[DVD]
Use the audio language menu to select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.
OSD
CONDITION
2 Channel
Preference Page
Change the audio output format.
(Available only if the disc supports available audio
type.)
1 / 2 : Ac3 2CH English
English
French
TV Type
Parental
Audio
Subtitle
Default
NTSC
ENG
2 / 2 : Ac3 5.1CH English
5.1 Channel
German
Italian
Spanish
1. Press the SETUP button during stop mode.
OSD
Stereo
CONDITION
Stereo
Portuguese
Russian
Chinese
[VCD]/[AUDIO]
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Audio.
Changes the audio output format.
(Available only of the disc supports available audio
type.)
Mono Left
Mono Right
Mix Mono
Mono Left
Mono Right
Mix Mono
4. Press the ENTER button.
Preferredd Audio Language
5. Press the
audio language.
/
buttons to select desired
[MP3]
An invalid button press.
20
17
DVD Setup
DVD Setup
Password Setup
1. Password Mode
4. Subtitle
In the Subtitle menu, you can select a subtitle
language. Please note that subtitle will only
appear in this language if the disc programming
has included it.
Preference Page
Password Setup, which is required for using the Parental Controls settings,
is divided into two modules: Turning on the Password function, and setting
a Password. The first step is to turn it on in the Password Mode setting.
TV Type
French
Spanish
NTSC
ENG
Parental
Audio
Subtitle
Chinese
Japanese
Korean
Russian
Thai
1. Press the SETUP button during stop mode.
Default
2. Press the
3. Press the
4. Press the ENTER button.
/
/
buttons to move to Preference.
buttons to move to Subtitle.
Others
Password Setup Page
5. Press the
subtitle.
/
buttons to select desired
Prefeerredd Subtitle Language
Password Mode On
Password
On
Off
5. Default
If you select RESET when in the DEFAULT settings
mode, all the settings of the Setup Menu will be
returned to the factory defaut settings, except for
Parental Level, Region and Password values.
Preference Page
TV Type
Parental
Audio
NTSC
On
ENG
Passwword Mode
Subtitle
Default
Reset
2. Password Change
1. Press the SETUP button when stop mode.
In the Password setup, you must first enter the current 6-digit passcode, and
then you have the opportunity to change it. The factory default passcode is 136900.
Once you have changed and confirmed the password, press the ENTER button.
2. Press the
3. Press the
4. Press the ENTER button to select Reset.
/
/
buttons to move to Preference.
buttons to move to Default.
Load FFactoory Setting
Password Setup Page
Password Mode On
Password
On
Change
Old Password
New Password
Confirm PWD
OK
Change Password
Please Enter Old Password
18
19
|